![](https://www.botnroll.com/18203-medium_default/conversor-usb-ttl-pl2303hx.jpg)
![Conversor PoUSB USB para RS232](https://www.botnroll.com/143-home_default/conversor-pousb-usb-para-rs232.jpg)
PoUSB12
![Conversor USB para TTL - TEL0010](https://www.botnroll.com/891-home_default/conversor-usb-para-ttl-tel0010.jpg)
Conversor USB - TTL (CP210)
![Conversor USB - TTL (PL2303)](https://www.botnroll.com/13793-home_default/conversor-usb-ttl-pl2303.jpg)
Conversor USB - TTL (PL2303)
- Em promoção!
- -4,60 €
![FT232 USB UART Board (Type A)](https://www.botnroll.com/2686-home_default/ft232-usb-uart-board-type-a.jpg)
Este conversor USB para TLL usa o chip PL2303HX para converter sinais USB em sinais TTL, o que o torna supper útil quando se ser comunicar o computador com microcontroladores em geral.
Se tiver alguma dúvida neste produto não hesite em contactar-nos.
*Atenção: as imagens são meramente ilustrativas.
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed500mA self recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
- The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
so that the board won't burnt down by material short cut.
- Electrostatic package, insures the board will not be damaged before use
Windows 98SE
Windows ME
Windows 2000 SP4
Windows XP SP2 and above (32 & 64 bit)
Windows Server 2003 (32 & 64 bit)
Windows Server 2008 / 2008 R2 (32 & 64 bit)
Windows Vista (32 & 64 bit)
Windows 7 (32 & 64 bit)
NOTE: For Windows 7, please use RC build 7100 or above.
Também poderá gostar
Este conversor USB para TLL usa o chip PL2303HX para converter sinais USB em sinais TTL, o que o torna supper útil quando se ser comunicar o computador com microcontroladores em geral.