Display OLED 1.5' 128x128 - WS

: LCD01082
11,90 €
preço com IVA incluído

Este é um módulo de display OLED, 1,5 polegadas diagonal, 128x128 pixels, 16 escalas de cinza, com controlador incorporado, comunica via interface SPI ou I2C.

Quantidade

DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

Features

  • 128x128 high resolution
  • 16 gray scale, better display effect
  • Supports SPI or I2C interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Driver: SSD1327
  • Interface: SPI / I2C
  • Display color: White
  • Gray scale: 16
  • Resolution: 128x128 (most other competitive products are typically 128x64)
  • Viewing angle: >160°
  • Operating voltage: 3.3V / 5V
  • Dimension: 44.5 x 37 (mm)

Interface

SYMBOL DESCRIPTION
VCC Power (3.3~5V input)
GND Ground
DIN Data input
CLK Clock data input
CS Chip selection, low active
DC Data/Command selection (high for data, low for command)
RST Reset, low active

There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:

  BS CS DC DIN CLK
4-wire SPI 0 Chip select Data/Command MOSI SCK
I2C 1 NC I2C address selection SDA SCL

Dimensions

1.5inch OLED Module dimensions

Development Resources

Wiki : www.waveshare.com/wiki/1.5inch_OLED_Module

 

Weight: 0.02 kg

  1. 1.5inch OLED Module x1
  2. PH2.0 7Pin x1
11.5inch-OLED-Module-1_93.jpg
2PH2.0-7PIN_93.jpg
LCD01082

Produtos Associados