JeTank AI Kit Accessories (Jetson Nano e baterias 18650 não incluídas) - Waveshare 20986

Quality chassis with track

Adopting 37-520 full-metal DC gearmotor, high torque, low noise

4-DOF robotic arm

180° wide angle rotation, flexible controlling

Quality serial bus full-metal digital servo

High torque, high precision, preventing it from being stuck and damaged

Auto Collision Avoidance

Collecting data via camera by taking enough images of different conditions, using the data to train the neutral network, combined with AI algorithm, finally achieving auto collision avoidance on sorts of environments.

Deep Learning, Autonomous Driving

Motion detection

Capturing moving objects on the video by motion detection

Recognizing and locking specified color by camera, and then using pan & tilt to track the specified color automatically

Gamepad teleoperation

Easier to use, more flexible

3D coordinate system controlled robotic arm

Calculated via inverse kinematics algorithm

Input coordinate of the target, calculating the moving angles of the 4-DOF servos by inverse kinematics algorithm, and then controlling the servos via serial bus, moving the robotic arm to reach target position

JupyterLab programming

JupyterLab is a web-based interactive development environment, supports multi data formats including code, document, image/video, UI control interface, etc., provides rich visualized output, allows easily creating dashboard and UI, supports flexible configuration and arrangement for modular interface.

8MP 160° FOV camera

IMX219 sensor, 3280×2464 resolution

Dual-Band Wireless AC8265

High Speed WiFi, Stable Bluetooth Communication, Low Latency

Highly integrated expansion board

Rechargeable, Battery Voltage Monitor, No Messy Wiring, Simple Assembly

SAFETY CAUTIONS

1. Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.

2. Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.

3. Do not mix use old batteries with new ones, avoid using batteries of different brands.

4. When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.

5. Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.

6. Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.

Resources & Services

1. Wiki: JETANK_AI_Kit

2. Assemby Guide

Package Content

Weight: 1.886 kg

The 18650 batteries are NOT included

Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more

1. NOT INCLUDED Jetson Nano

2. NOT INCLUDED TF Card 64GB

3. Aluminum alloy kit x1

4. JETANK expansion board x1

5. Wireless-AC8265 with antenna x1

6. IMX219-160 Camera x1

7. Acrylic camera spacer x1

8. Camera FFC x1

9. 0.91inch OLED x1

10. 12.6V 2A power supply + additional EU head x1

11. Robotic arm gripper x1

12. Thrust bearing x1

13. Flange bearing x2

14. Coupler x2

15. Gearmotor x2

16. 5264 servo wire x1

17. Track kit (including bolt, nut, and screwdriver) x2

18. 2*5Pin wire x1

19. Spanner x1

20. L-form hex socket spanner 2PCS x1

21. SCS15-AP servo x4

22. Screwdriver 2PCS x1

23. SCS15-S servo x1

24. Card reader x1

25. Mini cross wrench sleeve x2

26. Cooling fan x1

27. PH2.0 4PIN dual connector cable x1

28. Screws pack x1