DESCRIÇÃO EM PORTUGUÊS BREVEMENTE DISPONÍVEL
Se tiver alguma dúvida neste produto não hesite em contactar-nos.
*Atenção: as imagens são meramente ilustrativas.
More info and updated documentation on LilyGo product page (433MHz Non-Soldered OLED [Q395+L206]):
Note: OLED is not soldered to T-BEAM so if you need you can use T-Beam Shield directly
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.
Battery Size Reference
MCU |
ESP32 |
Flash |
4MB |
PSRAM |
8MB |
Serial Chip |
CH9102 |
Wireless protocol |
Wi-Fi + Bluetooth 4.2 |
PMU |
AXP2101 |
Onboard functions |
3 Buttons (Power+IO38+Reset) |
Antenna |
- 3D WiFi Antenna [Use by default]
- (Support WiFi IPEX external antenna, but you need to jump resistance)
- LoRa antenna
- GPS ceramic antenna
|
Description
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz] / SX1276[868/915/923Mhz]
Display Details
- OLED: 0.96 inch
- Driver: SSD1306
Software
Power Supply Mode
Support USB Micro/ 18650 battery holder [USB can power the battery]
1. Appearance
2. Size
3. Pin Diagram
[Pay attention to the OLED when opening the box, ship without 18650 battery]
433Mhz or 868Mhz Options
(OLED Not Soldered Version)