Official Raspberry Pi 7" Touch Screen Display with 10 Finger Capacitive Touch

The 7"Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi's. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

Features

• 7"Touchscreen Display.

• Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)

• Viewable screen size: 155mm x 86mm

• Screen Resolution 800 x 480 pixels

• 10 finger capacitive touch.

• Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.

• Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.

Compatible with

• Raspberry Pi 3 Model B

• Raspberry Pi 2 Model B

• Raspberry Pi Model B+Raspberry Pi Model A+

Part List

• 1x 7"Touchscreen Display

• 1x Adapter Board

• 1x DSI Ribbon cable

• 4x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display

• 4x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)