DISPLAY RGB 2.4i 65K RGB TFT 240×320 SPI

: LCD01147
13,80 €
preço com IVA incluído

Display RGB de 2.4 polegadas com interface SPI e compatível com Arduino e Raspberry Pi.

Se quiseres saber mais sobre este producto, consulta a sua Wiki Page.

Quantidade

Se tiver alguma dúvida neste produto não hesite em contactar-nos.

*Atenção: as imagens são meramente ilustrativas.

2.4" LCD DISPLAY MODULE

Embedded ILI9341 Driver, Using SPI Bus

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

 2.4inch-LCD-Module-details-1.jpg

 

Features At A Glance

  1. 240×320 resolution, 65K RGB colors, clear and colorful displaying effect

  2. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32

  3. Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

 

Specifications

OPERATING VOLTAGE 3.3V/5V RESOLUTION 240 × 320 pixels
COMMUNICATION INTERFACE 4-wire SPI DISPLAY SIZE 36.72 × 48.96mm
DISPLAY PANEL TFT PIXEL SIZE 0.153 × 0.153mm
DRIVER ILI9341 DIMENSIONS 70.50 × 43.30mm
 

Controlled Via SPI Bus

Supports Controller Boards Like Raspberry Pi/Arduino/STM32

2.4inch-LCD-Module-details-3.jpg
VCC Power (3.3V/5V input)
GND Ground
DIN SPI data input
CLK SPI clock input
CS Chip selection, low active
DC Data/Command selection (high for data, low for command)
RST Reset, low active
BL Backlight
 

Hardware Connection

Connecting With Raspberry Pi

2.4inch-LCD-Module-details-5.jpg

 

2.4inch-LCD-Module-details-7.jpg
 
2.4inch-LCD-Module-details-9.jpg
 
2.4inch-LCD-Module-details-size.jpg
 

Resources & Services

res_banner.png

Wiki: 2.4inch_LCD_Module

 

 

Package Content

Weight: 0.03 kg

  1. 2.4inch LCD Module x1
  2. PH2.0 8PIN 20cm cable x1
  1. 2.4inch-LCD-Module-3_220.jpg2PH2.0-wire-20cm-8PIN_93.jpg
LCD01147

Produtos Associados