PCIe TO Gigabit ETH Board (C) for Raspberry Pi 5, supports Raspberry Pi OS, is driver-free, side-mounting, and comes with an transparent acrylic mounting plate.
If you want to know more about this product, please check its Wiki Page.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
Designed for Raspberry Pi 5 - Supports Raspberry Pi OS, Driver-free, Plug and Play
| CONTROLLER | RTL8111H |
|---|---|
| Ethernet Port | RJ45 Gigabit Ethernet |
| PICe Interface | PICe x1 GEN2 |
| Power supply | 5V |
| Network standard | 10/100/1000Mbps |
| Indicator status | accessing 1000M network: the green indicator keeps blinking accessing 100M network: the yellow indicator keeps blinking |
Based on 16PIN PCIe Interface of Raspberry Pi 5
* for reference only, please refer to the Package Content for detailed part list
Onboard original high-performance RTL8111H chip Supports Raspberry Pi OS, Driver-free, Plug and Play
Adopts side-mounting solution to save space above the Raspberry Pi 5
* for reference only, please refer to the Package Content for detailed part list
Wiki: www.waveshare.com/wiki/PCIe_TO_Gigabit_ETH_Board_(C)
Weight: 0.021 kg
PCIe TO Gigabit ETH Board (C) x1
Transparent acrylic mounting plate x1
PH2.0 3PIN cable ~5cm x1
PCIe-Cable-50mm x1
Standoff pack x1
You might also like
PCIe TO Gigabit ETH Board (C) for Raspberry Pi 5, supports Raspberry Pi OS, is driver-free, side-mounting, and comes with an transparent acrylic mounting plate.
If you want to know more about this product, please check its Wiki Page.
