![](https://www.botnroll.com/19715-medium_default/sx1262-lora-node-module-for-raspberry-pi-pico-lorawan-868mhz.jpg)
![Raspberry Pi Pico -...](https://www.botnroll.com/15334-home_default/raspberry-pi-pico-rp2040.jpg)
The Pico-LoRa-SX1262-868M is a LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily.
This is the 868Mhz version, if you want the 433Mhz, just click Here.
If you want to know more about this product, please check the WikiPage.
Note: Raspberry Pi Pico is not included.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
The Pico-LoRa-SX1262 is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing problem between transmission distance, interference immunity, and power consumption that traditional solutions aren't able to deal with.
It supports LoRaWAN protocol, which allows it to connect the TTN, ChirpStack servers through a LoRa gateway to use LoRa Cloud service fast and easily.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Supports LoRaWAN protocol, different frequency bands are available
Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
PH1.25 battery header and recharge controller, allows connecting rechargeable Lithium battery
High receiving sensitivity (up to -148dBm), programmable emitting power (up to 22dBm)
Supports preamble detection, with CRC, up to 256 bytes data packet engine
Comes with development resources and manual (example in C)
Frequency band | 433M (410~525MHz) | 868M (863~870MHz) | 915M (902~930MHz) |
---|---|---|---|
RFID | SX1262 | ||
Emiting power | 22dBm | ||
Emiting current | 107mA@22dBm | 118mA@22dBm | |
Receiving current | 5.3mA@125KHz | ||
Modulation | LoRa/(G)FSK | ||
Operating voltage | 3.3V | ||
Communication bus | SPI | ||
Operating temperature | -40 ~ 85℃ | ||
Dimensions | 21.00 × 52.00mm |
onboard female pin header for direct attaching to Raspberry Pi Pico
NOTE: Raspberry Pi Pico is NOT included.
Raspberry Pi Pico header
Status indicators
RF switch control
MCP73831 recharge IC
SX1262 module
IPEX 1 antenna connector
Power switch
PH1.25 battery header
Industrial control, intelligent home, and data acquisition...
Weight: 0.033 kg
SX1262 LoRa Node Module x1
3.7V 600mAh Li-po battery x1
Antenna 2DB x1
IPEX1 to SMA wire x1
Related products
The Pico-LoRa-SX1262-868M is a LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily.
This is the 868Mhz version, if you want the 433Mhz, just click Here.
If you want to know more about this product, please check the WikiPage.
Note: Raspberry Pi Pico is not included.