Washable Resin Flashforge 500ml - Grey

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Specifications

Wavelength: 405nm
Volume: 500 ml
Compatible with Flashforge Foto Series & All LCD 3D Printers with 405nm
Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands

Properties
Density (g/ml): 1.13 ~ 1.24
Viscosity (cps, 25℃): 160 ~ 220
Hardness (D): 84 D
Tensile Strength (MPa): 32 Mpa
Elongation @ break(%): 8%
Flexural Modulus (MPa): 2200 Mpa
Flexural Strength (MPa): 58 Mpa

Recommendations

Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands
Avoid direct skin contact
Wash with water after touching the resin
Avoid lighting
Unused photopolymer resin needs to be stores in a dark, dry and cool place