KIT Workshop- Base level W/ Arduino

Description: This is a KIT with all the parts to partecipate to an Arduino Workshop. This kit version includes the Arduino Uno Board.

Base Level Kit is made of:

• 1 Arduino Uno R3 Board
• 1 USB cable
• 1 Straight single line pinhead connectors 2,54 40x1
• 1 Breadboard, 840 tie points
• 1 Set of 70 breadboard jumper wires
• 5 10K Ohm Resistors 1/4W
• 5 2.2K Ohm Resistor 1/4 W
• 10 220 Ohm Resistors 1/4W
• 5 330K Ohm Resistors 1/4W
• 5 100nF capacitor polyester
• 5 10nF capacitor polyester
• 3 100uF electrolytic capacitor 25Vdc
• 1 4,7K Ohm Thermistor
• 1 70..100K Ohm LDR VT90N2
• 3 5mm RED LED
• 1 5mm GREEN LED
• 1 5mm YELLOW LED
• 1 10Kohm linear potentiometer, pcb terminals
• 2 BC547 Transistor in TO92 Package
• 1 Piezo buzzer
• 5 PCB Pushbutton, 12x12mm size
• 2 4N35 Optocoupler DIL-6 package
• 2 Tilt sensor
• 1 Diode 1n4007
• 1 MOS Irf540