FriendlyARM NanoPi M1 Plus

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

CPU	Model: Allwinner H3 Number of Cores: Quad-core Frequency: 4*Cortex-A7 Up to 1.2GHz
GPU	Mali400MP2@600MHz，Supports OpenGL® ES2.0
Memory	RAM: 1GB DDR3
Storage	eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB
Connectivity	Ethernet: Gbps Ethernet WiFi: 802.11b/g/n Bluetooth: 4.0 dual-mode Antenna*1: IPX Connector
Audio	Audio Output: 3.5mm jack/Via HDMI Audio Input: onboard microphone
Video-Input	DVP Camera: 0.5mm pitch 24 pin FPC seat
Video Output	HDMI Type-A*1: v1.4, 4K@30fps CVBS*1(its video output is the 3.5mm audio jack)
USB	MicroUSB*1: MicroUSB 2.0, OTG & Power In, Type A USB Host: USB 2.0*3, USB Type-A *2 and 2.54mm pitch pin-header*1
Pin-header	GPIO: 40pin, 2.54mm pitch pin-header, compatible with raspberry pi 2's GPIO. It contains UART, SPI, I2C, I2S/PCM, SPDIF-OUT and IO Serial Debug Port: 2.54mm pitch 4-pin-header USB Host: 2.54mm pitch 4-pin-header
Button	Power Button*1 Reset Button*1
LED	Power LED(Green)*1 System Status LED(Blue)*1
Others	IR: onboard IR receiver Working Temperature: -20℃ to 70℃
Power	DC 5V/2A

OS Support	FriendlyCore( based on UbuntuCore-16.04 ) FriendlyWrt 19.07.1 (32-bit) Armbian DietPi Lakka
Kernel version	Linux-4.14-LTS U-boot-2017.11

PCB	6 Layer
Dimension	65*60mm

Related Resources

WIKI: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_M1_Plus

Schematic :NanoPi-M1-Plus-1702-Schematic.pdf

Allwinner H3 datasheet :Allwinner_H3_Datasheet_V1.2.pdf

Qt Application: Allwinner H3, Qt 4.8.6