Kit Cyclone PCB Factory

Description:

The main cyclone function is the milling of printed circuit boards, can also cut and burn acrylic, wood and wax.


BQ Cyclone project is Open Source, you can modify and evolve as you want.

It was developed by the author in the HRC with our engineers, because we still believe in the RepRap community and are committed to not set limits to knowledge. All improvements in Cyclone are free.

 
Specifications:

DIY

    Milling Properties

         speed:
         Low: 15000 rpm
         High: 35000 rpm
         speed:
         PCB surface grinding: 200 mm / min
         Punching: 40 mm / min
         Cut (PCB methacrylate): 40 mm / min
         Engraving (acrylic, wood): 50 mm / min

    connectivity

         USB type B

 

Description

    Resources


         Work material:
         Printed circuit board
         methacrylate
         wood
         wax


    Available colors:

         red

 

Size and weight

    Product Weight (Kg)

         5.1200

    dimensions

         260 x 250 x 385 mm

    Weight w box

         6935 kg

    box Dimensions

         298 x 310 x 264 mm

 

Box Contents

    Box Contents


         Mounting Guide

         Consumables:
         2 transparent rings of 3 mm methacrylate
         2 Substrates FR1 4
         1 strawberries Set
         Boats lubricants

         Electronics:
         mega 3D
         Power supply 12 V 8 A
         USB Type B
         Limit Switches
         Calibration Electrode
         cable calibration
         recogecables tube

         mechanics:
         Stepper motors Nema (2.5 A 1.8 degrees / step)
         thrust bearings B608zz balls
         linear bearings LM8UU
         screws
         rubber feet
         espirocristal tubes
         printed parts PLA
         perspex bases
         threaded rods
         smooth rods
         Dremel-200 Series