If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
Overview
This is a general LCD display Module, IPS screen, 0.96inch diagonal, 160x80 HD resolution, with embedded controller, communicating via SPI interface.
Features
- SPI interface, requires minimum GPIO for controlling
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Driver: ST7735S
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 160x80
- Backlight: LED
- Operating voltage: 3.3V
Interface
SYMBOL |
DESCRIPTION |
VCC |
Power (3.3V input) |
GND |
Ground |
DIN |
SPI data input |
CLK |
SPI clock input |
CS |
Chip selection, low active |
DC |
Data/Command selection (high for data, low for command) |
RST |
Reset, low active |
BL |
Backlight |
Dimensions
Development Resources
Wiki : www.waveshare.com/wiki/0.96inch_LCD_Module
Selection Guide
Part Number |
Type |
Color |
Resolution |
Display Size (mmxmm) |
Interfaces |
Driver |
Dimension (mmxmm) |
Pinheader |
0.91inch OLED Module |
OLED |
White |
128x32 |
22.38x5.58 |
I2C |
SSD1306 |
36.0x12.5 |
PH2.0 connector |
0.95inch RGB OLED (A) |
OLED |
65K colorful |
96x64 |
20.14x13.42 |
SPI(4-wire SPI) |
SSD1331 |
31.7x37.0 |
angled/horizontal |
0.95inch RGB OLED (B) |
OLED |
65K colorful |
96x64 |
20.14x13.42 |
SPI(4-wire SPI) |
SSD1331 |
31.7x37.0 |
straight/vertical |
0.96inch LCD Module |
IPS |
65K colorful |
160x80 |
21.70x10.80 |
4-wire SPI |
ST7735S |
32.5x26.0 |
PH2.0 connector |
0.96inch OLED (A) |
OLED |
1/4 yellow section, 3/4 blue section |
128x64 |
21.7x11.2 |
3-wire SPI, 4-wire SPI, I2C |
SSD1306 |
33.0x33.5 |
angled/horizontal |
0.96inch OLED (B) |
OLED |
1/4 yellow section, 3/4 blue section |
128x64 |
21.7x11.2 |
3-wire SPI, 4-wire SPI, I2C |
SSD1306 |
33.0x33.5 |
straight/vertical |
1.3inch LCD Module |
IPS |
65K colorful |
240x240 |
23.40x23.40 |
4-wire SPI |
ST7789 |
45.0x31.0 |
PH2.0 connector |
1.3inch OLED (A) |
OLED |
Blue |
128x64 |
29.42x14.7 |
3-wire SPI, 4-wire SPI, I2C |
SH1106 |
40.5x37.5 |
angled/horizontal |
1.3inch OLED (B) |
OLED |
Blue |
128x64 |
29.42x14.7 |
3-wire SPI, 4-wire SPI, I2C |
SH1106 |
40.5x37.5 |
straight/vertical |
1.5inch OLED Module |
OLED |
White (16 gray scale) |
128x128 |
26.86x26.86 |
4-wire SPI, I2C |
SSD1327 |
44.5x37.0 |
PH2.0 connector |
1.5inch RGB OLED Module |
OLED |
65K colorful |
128x128 |
26.86x26.86 |
3-wire SPI, 4-wire SPI |
SSD1351 |
44.5x37.0 |
PH2.0 connector |
1.8inch LCD Module |
TFT |
65K colorful |
160x128 |
34.50x28.30 |
4-wire SPI |
ST7735S |
56.5x34.0 |
PH2.0 connector |
Note: the 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.
PACKAGE CONTENT
Weight: 0.015 kg
- 0.96inch LCD Module x1
- PH2.0 20cm 8Pin x1
1 2