ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard. Antenna is included as image shows
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
This minimum-system development board is powered by an ESP32 module. It integrates Wi-Fi and Bluetooth functions, and provides a rich peripheral set for rapid prototyping!
ESP32-DevKitC achieves optimal RF performance. You can get right into application design and development, without worrying about RF performance and antenna design. ESP32-DevKitC has your basic system-requirements already covered. Just plug in the USB cable and you are ready to go!
ESP32-DevKitC contains the entire support circuitry of ESP32-WROOM series, ESP32-WROVER series, and ESP32-SOLO series of modules, also including a USB-UART bridge, reset- and boot-mode buttons, an LDO regulator and a micro-USB connector. Every important GPIO is available to the developer.
The ESP32-DevKitC pinout is optimized to enable prototyping on a breadboard. The on-board LDO output is led out for powering up additional off-board electronics. Peripheral outputs are grouped together for hassle-free prototyping.
Here you can go diretly to Espressif DEV-KITC webpage.
ESP Hardware Design Guidelines
| Boards | 
ESP32-DevKitC-32E |
ESP32-DevKitC-32UE |
| Related Module | ESP32-WROOM-32E | ESP32-WROOM-32UE |
| Flash / PSRAM | 4 MB Flash | 4 MB Flash |
| Antenna | PCB | IPEX |
Related products
ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard. Antenna is included as image shows
