

Passive PoE Cable Set

Cable UTP - Patch Cord cat5e - Black...

A PoE (Power over Ethernet) module from LilyGO. With this module it possible to connect to a router via an Ethernet cable and simultaneously supply the module with power via the same cable using PoE. This module is based on an ESP32-WROVER-E chip, which also makes it possible to use Wi-Fi and Bluetooth. The board has a USB-C connector with which it can be programmed and/or powered (USB-C cable not included).
Note: To use the PoE function, a switch or router that supports PoE or a PoE injector is required.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
More info and updated documentation on LilyGo product page (T-POE Pro [Q428])
It is an upgraded version of T-Internet-POE.
MCU | ESP32-WROVER-E |
Flash | 16MB |
PSRAM | 8MB |
Wireless Connectivity | Wi-Fi: 802.11 b/g/n/, BLE V4.2 |
Buttons | Reset Button + Boot Button |
Serial Chip | CH9102 |
Onboard Function | Expandable LCD screen interface |
L AN8720 Ethernet Network Port Low-Power Ethernet Physical Layer Transceiver |
PoE 5V@4A Power over Ethernet Module IEEE802.3 af/at, Input Voltage Range: 44~ 57V |
If you need technical support please check below link to find more details.
Size
Pin Digram
More Details
Related products
A PoE (Power over Ethernet) module from LilyGO. With this module it possible to connect to a router via an Ethernet cable and simultaneously supply the module with power via the same cable using PoE. This module is based on an ESP32-WROVER-E chip, which also makes it possible to use Wi-Fi and Bluetooth. The board has a USB-C connector with which it can be programmed and/or powered (USB-C cable not included).
Note: To use the PoE function, a switch or router that supports PoE or a PoE injector is required.