![](https://www.botnroll.com/8978-medium_default/raspberry-pi-zero-zero-w-case-frost.jpg)
![Raspberry Pi Zero Wireless (Pre-Soldered Header)](https://www.botnroll.com/8438-home_default/raspberry-pi-zero-wireless-pre-soldered-header.jpg)
Raspberry Pi Zero Wireless...
![Raspberry Pi Zero...](https://www.botnroll.com/8829-home_default/raspberry-pi-zero-pre-soldered-header.jpg)
Pi Zero cases consist of a 3-Part clip together construction with Micro SD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat extraction.
If you have any questions on this product please feel free to contact us.
*Disclaimer: The images are merely illustrative.
Pi Zero cases consist of a 3-Part clip together construction with Micro SD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat extraction. Each case features a top and bottom GPIO cut-out, which can easily be removed using a sharp instrument, or left in situ if the GPIO is not required. There's also 2 x M3 mounting holes on the back of the case, so you can effortlessly mount your Pi Zero where it's required e.g. your belt/dog/table/wall, and two internal microSD card slots to store you spare OS images.
Raspberry Pi Zero Case Features:
You might also like
Pi Zero cases consist of a 3-Part clip together construction with Micro SD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat extraction.