AP50H audio HIFI Bluetooth 5.0 Amplifier - TPA3116D2 50Wx2 USB + 3.5mm jack

If you have any questions on this product please feel free to contact us.

*Disclaimer: The images are merely illustrative.

Description:

XY-AP50H is a HIFI high-power Stereo Bluetooth Audio module.Dual channels audio signal output.Built-in amplifier module therefore it can connect to loudspeaker directly.It is ideal for DIY wireless Bluetooth speakers and transponders.

It can work with APP Sinilink which can display can monitor the current voice source and switch Equalizer.

Features:

1. 4 audio input modes

2. 5 working protection modes

3. Dual channel stereo output

4. APP Bluetooth control

5. 50W high power

6. Bluetooth automatic re-connection

7. Active/Passive audio output

8. HIFI High fidelity sound quality

Parameters:

1. Product Name:XY-AP50H 50W*2 HiFi Bluetooth Amplifier Module

2. Product Number:XY-AP50H

3. Working Voltage:DC 5.0V~27V

4. Amplifier IC:TPA3116D2

5. Control Type:Bluetooth/APP Sinilink Control

6. Audio input type:Bluetooth/AUX/U-disk/PC USB sound card

7. Bluetooth version:BLE 5.0

8. Communication distance:15meter(Max)

9. Channel:Dual channel stereo output

10. Output impedance:4ohm~8ohm

11. Match speaker:10W~200W

12. Audio output:Active/Passive audio output

13. Output Power:

    1. Output power 10W+10W at 12V 8ohm

    2. Output power 20W+20W at 12V 4ohm

    3. Output power 20W+20W at 20V 8ohm

    4. Output power 40W+40W at 20V 4ohm

    5. Output power 30W+30W at 22V 8ohm

    6. Output power 50W+50W at 21V 4ohm

14. Reverse connection protection:Yes

15. Over temperature protection:Yes

16. Short circuit protection:Yes

17. Overvoltage protection:Yes

18. Undervoltage protection:Yes

19. Working Temperature range:-40℃~85℃

20. Working Humidity Range:5%-95%RH

21. Module Size:60*60*25mm

Use steps:

1. Choose the right speaker and connect as shown in wiring diagram.

2. Connect to right power supply from input terminal.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.

3. Turn ON Bluetooth in phone.

4. Select Bluetooth device ‘XinYi’ in your Bluetooth device listing.

5. LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.

6. Module will playing music after select music in phone.LED indicator will keep slowly blinking.

7. Increase or Decrease volume by adjust potentiometer.

8. Press potentiometer to play or pause music.

9. Open APP Sinilink and register an account if need control by APP.

10. Click the dot on the right.

11. Select ‘Con Blu Dev’ and then Search Bluetooth.

12. Select devices ‘Sinilink-APP’ to connect module.

13. User can adjust volume, select next or previous, play/pause, select EQ.

14. Module will speak prompt voice if disconnected.

Application:

1. Modified speaker

2. Amplifier equipment

3. Car Bluetooth device

Note:

1. The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.

2. Recommended power supply voltage DC 5~27V.Module will be damaged if input voltage is more than 27V.

3. Please don’t use too long wires to avoid signal interference.

4. The format of U-disk must be FAT32 and the maximum memory is 32G.

5. It can only select one audio output mode between active output and passive audio output.

6. It is recommended to use a power supply which more than 2A.

7. Please read use manual and description before use.